1800mm Tidal Flap Valve
1800mm tidal flap valves are recommended for use below the waterline and in tidal applications for pipework up to 1800mm. Our tidal flap valves are typically installed below the normal water level to prevent back flow up a pipe. Althon tidal flap valves are suitable for use with a water pressure of 5 MWC for 72 hours and 1 MWC for 50 years. The flap valve is HDPE with HDPE ribs and can be further reinforced where necessary with stainless steel. We offer a range of standard sizes form 100mm to 2000mm and can quote for bespoke sizes as required. We can also offer rectangular tidal flap valves on request.
- Tidal flap valve for pipework up to 1800mm
- 10mm opening pressure even when submerged
- Lightweight, easy to install and handle
- Maintenance free, occasional inspections recommended
- Adaptable to meet site specific pressure or installation demands
- 50 years operational life
The flap valve is HDPE with HDPE ribs and can be further reinforced where necessary with stainless steel.
The valve plate and the back plate are manufactured in HDPE. The hinge pin and ballast weight are manufactured in SS316 as standard. The ballast weight can be easily adjusted if required. The sealing arrangement consists of an EPDM lips seal in the back plate. The valve plate is also installed on an angle in relation to the back plate to ensure a good seal.
Please note drawing is for visual purposes only and not to scale
All dimensions in millimetres